1. Dual hydraulic chain-drive cylinders manufactured on high standard ,lifting smoothly.
2. Standard door protection rubber pads to prevent possible damage to the door opened without caution.
3. Power pack with UP button and manual lowering valve handle.
4. It has been proofed by dynamic test with 115% of rated capacity and static test with 150% of rated capacity.
5. Manual two side lock release system.
6. The arm locks engage automatically when the lift is raised and disengage when fully lowered.
7. Shot blasting and high temperature baking powder coated surface finish.

1. Underground installation, 3500kgs lifting capacity, The lowest level of the machine is the same with ground level with larger working space.
2. All the seal kits of cylinder, ball valves are imported, safe and anti-explosion oil cylinder.
3. Extendable platform for two or single side (optional) which can be used for more cars.
4. Pneumatic lock release, considerably reduce the noise when the machine running.
5. Spray the surface treatment, corrosion resistance.
6. All pivot joints made with self-ubrication bushing ensure long service life.
7. Mechanical locking teeth, plasma power cutting enhances the precision and safety factor.

1.Equipped with rear side slide and adjustable front wheel positioning groove, suitable for all kinds of car four wheel aligners.
2.Thickened 25mm solidsteel scissor arm,high strength, corrosion deformation resistance
3. Imported hydraulic components, good synchronization performance.
4. Each activity has a high quality self-slip oil bearing.
5. Imported seals are used for the sealing of pistons and cylinder rods.
6. Hydraulic and pneumatic unlocking mechanical double insurance to ensure safety.
7. Self-lubricating with nylon slider, no noise, super wear-resistant.
8. The cylinder is equipped with an explosion-proof valve to ensure safety.

1. Simple and convenient car repair equipment for quick repalr, its' simple operation, fexible moving and saving space make the quickand smal repair more easilv.
2. Pull down the steering mechanism, can be stretched and repaired under different positions3. The position and height of the main fixture can be adiusted, and the clamping is firm and convenient.
4.High-power pneumatic hydraulic pump with strong power.
5.180 degree rotatable pull tower, no dead angle stretching.
6.The surface of electrostatic spray, beautiful and durable.
7. Zigzag chain fixing system to facilitate the height adjustment of the chain.
8. with CE certificate

1.Super low platforms and ramps meet various chassis height of vehicles,small space to take and installed directly on the ground.
2. Double tandem synchronous balanced cylinders and four cylinders driving ensures synchronous lifting of platforms, the 4.0T lifting capacity can match various vehicles repair requirement.
3. The lift is equipped with secondary lifting trolley, moving flexibly, controlled by manual button and remote.
4. Extended side slide adapts to vehicles of various wheelbases. The lift can be used for small vehicles including Pickup, SUV and business vehicles.
5. The use of mechanical safe lock, explosion-proof valves and self-lock of hydraulic systems ensure a safe work.
6. Imported oil seals prolongs the life of the cylinder. The combination valve block structure can level the machine.
7. Double deck steel oil pipe achieves good explosion-proof performance.
8. The surface adopts the shot blasting, degrease, static powder coating, so it is of anti-erosion, good adhesion and high hardness.

1.High-strength manganese steel scissor lift has stable structure, large load capacity, smooth lifting, easy installation and maintenance.
2. Hidden scissor thin structure which occupied small space, also don't need ground pits.
3. Start-up device guarantees 3.5ton lifting capacity at the initial lifting stage and smooth lowering at the last lowering stage.
4. The pneumatic double-teeth self-locking system and the anti-explosive pipe insurance structure, safe and reliable.
5. Easy to handle control unit (24v control voltage) with emergency stop.
6. Drive-on ramps which can be locked on level as platform extension, suitable for more long chassis vehicles.
7. Imported hydraulic pressure, pneumatic and electrical components.
8. Easy for tire removal and chassis maintenance.

1. Mid rise scissor car lift, pneumatic /electrical safety lock release.
2. Low profile design, above ground installation, takes up little space.
3. Seamless steel pipe connecting platform, stable operation of equipment.
4. Surface shot blasting process ,electrostatic powder spraying, strong surface adhesion and durable powder coating.
5. Lengthened platform automatic rising car-baffle suitable for various types of automobile.
6. Device perform stable work is relayed on imported hydraulic, pneumatic and electrical components

1.Driven by multi frequency high torque motor,lifting capacity 4500kg.
2.Powered by 380V/220V voltage,providing a super large driving force.
3.Equipped with safety emergency stop button, one click shutdown lock and safety leakage protection device.
4.The device can simulate different bumpy road surfaces through the microcrystalline regulator, , achieves precise detection.
5.Precision drive connection, belt drive, good silence effect, providing the best detection environment.
6.Equipment weight 680kg,supported and adjusted at 8 points to ensure stability.
7.Total six sets of equipment, equipped with stress release devices, more comprehensive and accurate in detection.

1. Mid rise scissor car lift, pneumatic /electrical safety lock release.
2. Low profile design, above ground installation, takes up little space.
3. Seamless steel pipe connecting platform, stable operation of equipment.
4. Mobile type design ,convenient for customers to use.
5. Power unit with pure copper core motor international famous brands.
6. Surface shot blasting process ,electrostatic powder spraying, strong surface adhesion and durable powder coating.
7. Lengthened platform automatic rising car-baffle suitable for various types of automobile.
8. Device perform stable work is relayed on imported hydraulic, pneumatic and electrical components.

1.Driven by multi frequency high torque motor,lifting capacity 4500kg.
2.Powered by 380V/220V voltage,providing a super large driving force.
3.Equipped with safety emergency stop button, one click shutdown lock and safety leakage protection device.
4.The device can simulate different bumpy road surfaces through the microcrystalline regulator, , achieves precise detection.
5.Precision drive connection, belt drive, good silence effect, providing the best detection environment.
6.Equipment weight 680kg,supported and adjusted at 8 points to ensure stability.
7.Total six sets of equipment, equipped with stress release devices, more comprehensive and accurate in detection.